Automatic dispensers are widely used in semiconductor, electronic components, LCD manufacturing and other fields. Its principle is that the rubber is pressed into the feed tube connected to the piston by compressed air. When the piston is in the upper punch, the piston chamber is filled with glue, and the glue is pressed out of the dispensing head when the piston is pushed down. The automatic Dispensing Machine is suitable for dispensing fluids. It is much higher in degree of automation than manual dispensing machines. From the point of view of dispensing, the quality level of the product will be higher. The automated operation is simple and controllable.
1.Machine using the latest dispensing technology, nice appearance, the machine has run fast, accurate positioning, the glue evenly, the noise is small, stable performance and so on.
6.CAD graphics and PLT files can be imported into the machine to generate motion programs. Working particle size up to 0.1mm.
Application :
1. Suitable for fluid dispensing, such as: UV glue, AB glue, EPOXY (black glue), white glue, EMI conductive glue, SILICON, epoxy resin, instant glue, silver glue, red glue, solder paste, thermal paste, anti Solder paste, transparent paint, screw fixative, etc. Automatic Glue Dispensing Machine Glue Dispensing Machine,Epoxy Dispensing Machine,Silicone Dispensing Machine,Automatic Liquid Dispensing Machine Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , https://www.jatentech.com
The scales are opened and the whole process is listed as follows:
The first step is to first loosen the signal line of each load cell of the weighing scale from the junction box and record the response. In the future, the device should be installed on the original position of the junction box. The signal line must not be cut off. Then the main line is also closed.
The second step: disassemble the connecting screws between the two scale bodies, there are longitudinal and transverse.
The third step: pick up the steel balls under the scale body, steel balls and steel pads and respond to thin iron gaskets.
In the process of lifting and transportation, pay attention to the sensor signal line with a good response to prevent crushing and pressure breaking. The load cell should be prevented from chaos during the disassembly and lifting process. 
Do a good job in the above steps, the task of dismantling the ground scales is considered to pass the completion of the task, can not save the map, save the sensor signal line full shear, and other improper handling, if such disposal will bring about for the future use of weighing Big trouble. As soon as it rains, the junction of the signal line will go wrong if it enters the water.
3.Use of hand-held control box, multi-axis dispensing software system, Chinese and English interface operation, machine programming, the control box can be run offline.
4.To complete a variety of straight / slash / round / arc / 3D graphics, flat, high and low uneven, interpolation of the complex graphics of the plastic over-coating and so on.
5.The movement speed, dispensing, glue volume, pressure, vacuum suction (control glue drip) can be arbitrarily change the program control.
2. Suitable for: mobile phones, computer cases, optical drives, printers, ink clips, PC boards, LCDs, LEDs, DVDs, digital cameras, switches, connectors, relays, heat sinks, semiconductors, etc., or SMT equipment connection fast point / glue, clock, toys, medical equipment and other liquid dispensing products.
What to pay attention to when opening the scale scale body
Scales, I believe that most companies are not rusty, commonly used in ports, warehousing, workshops, freight yard, its superior features and long-term stability, reliability, not only improve the efficiency of industrial and mining enterprises in and out of commercial settlement of materials, and can Deepening the monitoring of the production process and the comprehensive data system governance of the company, meeting the requirements of modern weighing management.