How to drive fuel is a problem that most drivers are concerned about. After all, the price of oil is so high. In fact, we can start with driving skills and driving habits. Today we share these experiences and hope to help everyone. First, driving fuel-saving skills 1, control the optimal speed When driving, the number of engine revolutions of an EFI car is generally the best around 2200-2500. The number of engine revolutions is maintained at around 2200-2500 regardless of the gear position. The low-speed cars could not move, they did not walk in the fuel, and they also hurt the engine. Too high speeds increase fuel consumption and hurt the engine. 2, keep the best speed The most fuel-efficient driving state is uniform straight-line driving. The most fuel-efficient speed is 60-80 km/h for low-displacement vehicles, and 80-100 km/h for medium-displacement vehicles. It is the most fuel-efficient when the car is running at economic speed. 3, control shifting speed and best driving position Manual gear control shift speed: When shifting, slightly more oil than normal driving state, let the speed express to more than 2500 points. If the shift is less than 2,000 rpm, the speed will have to go down after shifting. There is a sense of getting out of gear, and you have to refuel to get it back. Instead, you have to use more fuel. The best gear for automatic transmission: 1 gear for low speed or steep slopes, 2 gears for up and down long slopes or steep slopes, 3 gears when the speed is below 60 km in the bumpy road or 2nd level road or in urban areas when the speed is Most of the more than 60 should use the D file to drive, fuel-saving and quiet. 4, soft start Hang on the low block and slowly step on the accelerator pedal to accelerate slowly. When the car reaches a certain gear speed, learn to listen to the sound of the engine to gradually shift the gear from low to high. This can reduce the engine's warm-up time and increase fuel efficiency. If you start the throttle to increase speed, this will not only hurt the car will greatly increase fuel consumption. 5, lift the throttle Raise the throttle to save fuel. If you slam the throttle, it will suddenly reduce the engine speed and play a drag role, offset some of the inertia of the car, and make the car "flutter" and increase fuel consumption. 6, reduce the brake Braking is essentially a process of energy conversion. Braking means energy consumption. Therefore, you should lift the throttle in advance at the intersection and downhill. 7, keep the distance with the car If the road is congested and the front vehicle brakes frequently, it should keep sufficient distance with the vehicle ahead. This can allow for a deceleration, and it can reduce the number of brakes to achieve the purpose of fuel economy. Second, the use of fuel-saving techniques 1, full tire pressure Make sure the tire pressure is normal. High or low tire pressure will increase fuel consumption. The pressure of automobile tires must be strictly enforced according to the requirements of each vehicle specification. In summer, in order to prevent high heat on the road surface, especially when the tires run long distance, the gas in the tire expands, the pressure increases, and the pressure can be reduced by 10%. 2, half tank oil To reduce body weight is to reduce fuel consumption. Do not install a full box of oil in the city to run near the road, this is the "oil consumption"! Considering that the petrol pump is installed in the fuel tank, it is cooled by the heat of the petrol, so if it is not far away, it is best to keep the half tank oil. At the same time, the interior of the car must be streamlined, with less weight, and one point of oil. 3, high speed off the air conditioning window is particularly stupid The operation of the air conditioner does consume a portion of the engine's power. Some car owners always feel that opening the window at high speed and turning off air conditioning is an environmentally friendly act. In fact, every time the vehicle speed exceeds 80km/h, the fuel consumed by the air booster after the window is opened will consume more fuel than the air conditioner, and the noise will multiply. 4, try not to install car accessories to increase wind resistance Some riders like to install a variety of car accessories on the car, such as a glass sunvisor, rearview mirror rain eyebrow, roof rack, ceiling light, large enclosure and so on. Although it may look dazzling, these small objects that are exposed outside the car body will greatly increase the drag coefficient of the car. The higher the speed, the more obvious. The greater the wind resistance of a car, the more it will cost more. Of course, saving fuel is not something that can be done overnight. Even if it is saved, it is not obvious. However, over time, it is believed to be a very impressive figure. It can even be less than half the province and hope that everyone can develop good results. The habit of driving and using cars reduces fuel expenses.
Automatic Feeding Machine
Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200
Specification:
Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.
Advantages:
Fully automatic design, save time and manpower;
Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.
Automatic Feeder Machine,Pyrolysis Feeder,Auto-Feeder Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
Engine revolution 2200-2500 the most fuel-efficient? Drive to break through these seven points