A solid-melting furnace, the two sides of the furnace body of the solid-melting furnace are respectively provided with a feeding door and a discharging door; A workpiece conveyor belt that can place workpieces, a plurality of heating units are respectively arranged in the furnace along the feeding direction, and the heating units include an air guide device, a heat radiation tube and a heat circulation fan. The cover is arranged above the workpiece conveyor belt, the thermal circulation fan and the heat radiation pipe are fixed in the inner recess of the air guide device, and the two sides of the inner recess of the air guide device are provided with air inlets and are connected with the air outlet of the heat circulation fan. The hot air blown by the fan is guided by the air guide device and then all blown onto the surface of the workpiece placed on the workpiece conveyor belt. The solid melting furnace can improve the guidance of the heat flow, ensure that the workpiece is heated evenly, thereby improving the heating quality, and at the same time, it can meet the requirements of the furnace. The internal temperature difference is 1.5℃~2℃. Furnace Anchor,Metal Stud Anchors,Anchors For Furnace,Refractory Fining Anchors Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
Come applicare le pellicole solari per vetri? Istruzioni e guida completa
There are numerous advantages to applying solar films on the glass surfaces of buildings. These films help retain coolness during summer and warmth during winter, while also shielding the glass to reduce overheating inside the rooms. The immediate benefits include energy savings and a reduction in utility bills. Additionally, solar control films offer excellent UV protection, safeguarding both your skin and your furniture, such as carpets, sofas, and more. All this can be achieved without significant renovations, excessive costs, or the need to replace windows. Simply choose the right solar film and apply it correctly to your glass surfaces. Fortunately, this process isn't overly complicated. Let's explore a comprehensive guide with clear, step-by-step instructions on how to apply solar films to glass surfaces without making mistakes.
### What You'll Need for Applying Solar Films
Before you start, make sure you have everything you need. Besides having an adequate amount of solar control film—essentially a roll long enough to cover your surface—you’ll also need:
- A soft, clean cloth for cleaning
- A scraper for cleaning purposes
- A hard rubber spatula
- A spray bottle filled with water
- A metal ruler
- A metal square
- A sharp cutter with a steel blade
- A spatula
- Paper towels
### Conditions for Installation: Requirements
In addition to ensuring you have all the necessary tools, it’s essential to confirm that conditions are suitable before applying solar films. First, ensure that the glass surfaces are smooth and in good condition, as well as thoroughly cleaned. The temperature should not drop below 10 degrees Celsius. It’s best to choose a day without strong winds or air currents, as these could complicate the application process and introduce dust particles between the glass and the film.
### Preparing the Glass Surface Before Application
As mentioned earlier, cleanliness is key. Clean the glass using a detergent that doesn’t leave behind residues like lanolin or wax. Similarly, the cloth used for cleaning shouldn’t shed fibers. After careful cleaning, use a scraper to ensure no contaminants remain, paying special attention to corners and edges near window frames. Once the glass is spotless, you’re ready to proceed with the solar film application!
### Step-by-Step Instructions for Applying Solar Films
Let’s go through the steps for applying solar films:
1. Begin by lightly and evenly spraying the cleaned glass with water from the spray bottle.
2. Next, lay down the film, working from the backside (keeping the liner facing you). Thanks to the water on the glass, the film will adhere easily.
3. Remove the protective liner.
4. Now, spray the exposed adhesive surface generously with water to activate it. This removes the hydro-soluble coating protecting the adhesive. After about two minutes, the adhesive will be fully active and ready for use.
5. Flip the solar film so the adhesive side faces the glass, spraying again with plenty of water.
6. Adjust the position of the film, which will glide smoothly thanks to the underlying water.
7. Start spatula-ing the film to spread it evenly. Adding a bit of water mixed with a few drops of mild soap can help the spatula glide smoothly.
8. Trim the excess film using a ruler, square, and cutter, leaving about 2 mm of space between the film and the window frame.
9. Continue spatula-ing with more pressure to perfect the application.
10. Finally, use the spatula and paper towels to press down the edges for a seamless finish.
Your solar film application is now complete. Following these steps, you can protect all your building’s windows and glass surfaces.
### Post-Application Considerations
It’s worth noting that the adhesive on the window films takes around 15 days to fully dry. Therefore, it’s recommended to wait at least two weeks before cleaning the glass to avoid compromising the protective work done.