Uncoiling Slitting Cutting Collecting
Uncoiling Slitting Cutting Collecting
Uncoiling Slitting Cutting Collecting, Uncoiling Slitting Cutting Collecting Line, Uncoiling Slitting Cutting Collecting Machine Line Botou Xianfa Roll Forming Machine Factory , https://www.rollformingmachinecn.com
On June 4, 2011, Sutong Shipping Engineering Co., Ltd. and Jiangsu Bolunbao Shipbuilding Co., Ltd. officially signed the “Non-self-propelled wind power installation crane lifting installation contractâ€, which is produced on both sides of the offshore ship. The scope continues to work together after the 2600T self-propelled crane.
The ship is a steel four-legged non-self-propelled wind power hoisting ship. The total length of the ship is 89.9M, the width is 39.0M, and the depth is 6.6M. It has the maximum lifting power of 700T, and the maximum lifting height of 140M (when lifting the ship) is fully reversed and turned hydraulic crane, which has the effect of flexible shifting in the homework area. The vessel can be used for wind power equipment placement in China (including pedestal placement, support tower and engine room hoisting and blade placement), lifting and piling lessons.
Construction of the ship started in April 2011, and it was planned to start on the 7th of June, and the water will be delivered at the end of September and delivered in December. The whole ship's internal production plan and construction are all realized by the company's interior miracle department.
Sutong Shipping received the heavy ship interior order