Rainy weather automobile glass cleaning is very important

The cleaning of windows is not only a matter of appearance, but it is also necessary in terms of safety. Especially on rainy nights, the film's glare will affect the field of vision and must be cleared immediately. If it is a slight stain, it can be wiped clean with a towel without the use of body cleaners. It can also remove the oil film. After completely removing the dirt, it is best to apply a protective agent, which can make the oil film is not easy to adhere.

1. Dirty windows threaten safety. When driving at nighttime in the rain, the wiper wipes off and the residual oil film dazzles, greatly affecting the field of vision.

2. Thoroughly clean the windows, clear vision immediately, and make it easier and safer to drive at night.

3. If the oil film adhered to the glass is difficult to remove by ordinary methods, use a special chemical composition that removes the oil film to wipe it off.

4, not only the outside, the interior of the glass must also be wiped, the heat shield must be wiped laterally, if the vertical wipe sometimes breaks the heat shield.

5. Window protector that can effectively prevent dirt and oil film on the glass surface. But before using it, you must clean the windows first, otherwise it will be hard to be effective.

6, after the protective agent is dried, it will turn white like waxing, just wipe it with a soft cloth.

7, after the protective agent, the water will fall in a granular form, if the rain is not large, you do not even need to activate the wiper.

8, there are protective agents added to the tank. Just clean the windshield before use, otherwise the effect will be poor.

For LIUGONG Cylinder Seal Kit

Precautions for daily maintenance of hydraulic cylinders
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.

For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong

Safe Seal Technology Co., Ltd. , https://www.jolseals.com