Bow spring casing centralizers
Bow spring centralizers, both welded and non-welded is to help center the casing in the wellbore, allowing even distribution of the cement around the casing during cementing operations according to API10D standard size from 4-1/2" to 20".
Feature :
A) Designed for high restoring force and low starting& running force.
B) End collars are designed with self-locking action,which are easy to assemble.
C) Undergo special coating process to prevent from rust.
D) Can be shipped in half assemble condition for economy in shipping and storage costs.
E) Specification:4-1/2" to 20". any special size or combination available on request.
Technical parameters:
No
Specification
Bow type
ID(mm)
Length(mm)
Max OD
(mm)
Bow spring
1
5-1/2"*8-1/2"
I .â…¡
142-148
600±50
225±5
5
2
7"*8-1/2
I .â…¡
181-186
600±50
235±5
6
3
9-5/8"*12-1/4"
I .â…¡
250-255
600±50
330±5
8
4
10-3/4"*12-1/4"
I .â…¡
274-276
600±50
330±5
9
5
13-3/8"*17-1/2"
I .â…¡
342-347
600±50
450±5
11
6
20"*26"
I .â…¡
510±1
600±50
660±5
12
Note :â… (single bow),â…¡(double)
Cementing plugs:
Cementing plugs from high performance material such as rubbers and phenolic resins.our cementing plugs are specially designed with a positive wiping action to ensure that the casing is clean, we have both conventional standard plugs and non-rotating plugs.
Top plugs
The top cementing plug is designed to exert continuous pressure on the casing wall. The core is made of aluminum or phenolic depending on the application and well conditions, the tapered base fits the cavity of the bottom plug initiating a positive seal. A solid rubber top plug is also available.
Bottom plugs:
Like the top cementing plug,the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. The core of bottom plug is alao made of special material such as aluminium or phenolic resins depend on the application and well conditions, a rubber diaphragm at the top bottom plugs ruptures after the plug is seated allowing cement to flow through
TECHNICAL PARAMENTERS
Type
Sizes
Working temperature
Working pressure
Burst pressure
hardness
Top plug&bottom plug
4-1/2",5-1/2",6-5/8",7",8-5/8",9-5/8" standard/ non rotating
-30℃ to 150℃
≥15MP
1MP-2MP
75-95
13-3/8",20"standard/ non rotating
-30℃ to 150℃
≥10MP
1MP-2MP
75-95
Float collar and float shoe
Float equipment serves the backbone of casing equipment used during primary cementing operations, float equipment guides the casing to total depth and prevents contaminated mud from entering the casing. Also,it provides a landing point for casing wiper plugs, reinforces the lower end of the casing string, and ensures greater accuracy of cement slurry displacement.
FEATURES:
API 5CT,API 5B,API RP 10F rating,china petroleum department standarc SY/T5618-2000.
Rounded nose profile helps guide the casing string(only for float shoe).
The valve is made with phenolic material and molded with high strength concrete. Both the calve and concrete are easily drillable with PDC or rock bits.
High strength design ensure excellent performance for flow endurance and back pressure holding.
Automatically non-rotational groove design ensures corresponding cementing plugs drilled out quickly(only for non-rotating float collar).
Single valve and double valve versions are available. Spring structure and bal structure valve are available: insret type and normal type are available.
Material and size:
API CASING GRADE: J55,K55,N80,P110,L80,etc.
SIZE VARY FROM 4"TO 20"
AVAILABLE CONNECTIONS:
API5RD CONNECTIONS:LTC,STC,BTC
Solid rigid casing centralizers
Rigid centralizers are an integral part of the cementing process. They provide the mechanism that centers the casing in the hole and allows uniform cement flow around the casing to help protect it at all point. Several styles of centralizers are available for matching different well specification and hole size,including turbulence generating designs that help clean the annulus and distribute the cement more evenly and uniformly. All models offer ample clearance for fluid passage and are extra effective in centering the casing, even in highly deviated hole and improve cement flow by reducing the effects of channeling.
Technical parameters
Model
Style
Max OD(mm)
ID(mm)
Length(mm)
GF4-1/2x6
â… .â…¡.â…¢
145
116.5
200
GF5x6
â… .â…¡.â…¢
145
129
200
GF5-1/2x8-1/2
â… .â…¡.â…¢
205-210
142
200/300
GF6-5/8x8-1/2
â… .â…¡.â…¢
205-210
171
200/300
GF7-8-1/2
â… .â…¡.â…¢
205-210
181
200/300
GF7-9-1/2
â… .â…¡.â…¢
225-235
181
200/300
GF7-9-5/8
â… .â…¡.â…¢
225-235
181
200/300
GF9-5/8x12-1/4
â… .â…¡.â…¢
300-305
248
200
GF13-3/8-17-1/2
â… .â…¡.â…¢
430-435
346
200
Note: GF series rigid casing centralizer, classified as straight strip type (typeâ… ),spiral(type â…¡),roller type(type â…¢).
Stop collar
Stop collar is used to hold centralizers or cement baskets on any position casing, which ensures the position of centralizers or cement basket to meet the design, the stop collars are available in two types hinges type,slip on type, the stop collars can be installed on casing to limit the axial movement of centralizers and cement baskets.
Usage
1. Fastening screw stop ring when use, first set into the casing ,and then using a wrench to tighten the screws.
2. Fixed screw type when use ,first set into the casing,and then insert screws,Type in with a hammer.
3. Snap fit stop ring, direct stop ring button on the casing,use pin lock, then knocked into the screw.
Hinged bolted stop collars
An economical collar suitable for sub-critical annular tolerances,available in the size range 4-1/2" to 20",it has a cross bolt design which makes it an efficient and user friendly device.
Hinged spiral nail stop collars
Available in the size rang 4-1/2"-20",this device can be in both upset and non-upset casing to provide maximum clearance during rotation. It has a grove in the middle into which a spiral nail can be driven for improved grip on the casing, the broader firmly grips the collar into position around the casing.
Hinged stop collars with set screw
Available in the size rang 4-1/2" to 20", this device has a high cost-utility ratio. This hinged collar with a row of set screw position easily and firmly around the casing.
Slip on stop collars with set screw
This slip-on set screw device is recommended for small hole operations,available in size rang 2-7/8" to 20"and is gripped by a row of screw, this is a heavy duty device.
Cementing tools Henan Dongfanglong Machine Manufacture Co., Ltd , https://www.eastlongmachine.com
At present, when choosing a parking system, many people are most concerned about the problem of vehicles entering and exiting. Many manufacturers will also explain to buyers from the management of parking entrances and exits. After all, entrances and exits are the key to influencing vehicles entering and exiting the parking lot. The factor, however, is it really possible to solve the current parking problem from the entrance? Actually, even if the current truck-free identification parking system is applied in various places, especially in some large parking lots, people still feel that the problem of parking is still plaguing our lives.
The problem of parking is not only to be resolved from the access, but also to find a parking space and payment to facilitate a comprehensive solution to people's parking problems. With the increase of vehicles, it is completely unrealistic to rely on the management of parking lots to guide the vehicles to guide the owners to stop the remaining parking spaces. It is most convenient to use modern advanced technologies and equipment to allow the owners to park by themselves. The parking guidance system is aimed at If people are looking for parking spaces, they are designed to install parking sensors for each parking space to clearly display the parking spaces in the parking lot. Payment at the exits may take longer than importing and taking cards. Therefore, diversified payment is used. The mode can make the owner more selective in the payment.
In order to fundamentally solve the parking problem, we must not only consider the management of the entrances and exits, but also should pay attention to the other issues that affect the owners' parking difficulties. When choosing a parking lot system, we must not ignore its other functions.
Parking system installation should pay attention to several major functions
The security industry is a hot industry nowadays, many giant companies have laid out one after another, hoping to get a share. The parking area is still an unabated wave of enthusiasm. However, when the parking system is installed, people tend to overlook the following features of the parking system. Following is a brief introduction to the major features of the parking system in the parking lot. Hope it helps.
Next Article
DIN 935 Hexagon Slotted Castle Nut