Introduce to you the use of ball mills in industry

It is understood that the ball mill is not only widely used in the building materials industry, but also widely used in metallurgy, beneficiation, chemical industry, electric power and Other industries. According to the production characteristics are divided into dry and wet ball mill; intermittent grinding and continuous grinding. Among them, intermittent grinding is used as a test mill as well as a ceramic mill. So it is a very good cement equipment. Therefore, large-scale continuous grinding is used in industrial production. The crushing ratio can be up to 300 or more, and the fineness of the product can be adjusted easily, the product particle size is uniform, and the mixing effect is well maintained.

Material adaptability can be made into mills with different specifications and sizes, so it can adapt to the requirements of various production capacities. The output per hour is from a few hundred grams to two or three hundred tons. In particular, it is capable of continuous production with high production capacity and can meet the needs of modern large-scale industrial and industrial production. The fine mud encountered by coal in flotation is mostly fine particles of easily argillized vermiculite and charcoal. They cover the surface of coarse coal and reduce the floatability of coal. The circulating water in the coal preparation plant often contains fine argillaceous particles with ash content as high as 40% to 50%, and its concentration should generally be less than lOOmg/L.

Adaptability can work in a variety of different situations, can dry production, but also wet production, but also the drying and grinding together at the same time. When circulating water is used as makeup water for flotation, the floatability of the coal is reduced and the amount of flotation agent is increased. The data shows that when the clean coal production rate is the same, the application of recycled water flotation compared with the use of fresh water, the collector consumption doubled: If the same amount of flotation agent, the clean coal yield decreased by about 35%.