How to Serve the Sprinkler--Xiagong Chu Sheng

How to Serve the Sprinkler--Xiagong Chu Sheng

Xiagong Chu Sheng special car also needs maintenance. So, how does the sprinkler need to be maintained?

First, check and clean the carburetor, gasoline pump and gasoline filter to see if you need to replace the special car oil.

Second, clean crude oil, fine filter and filter, release sediment, check the amount of oil and quality, check the lubrication system (joint) there is no oil leakage phenomenon.

Third, check Xigong Gongsheng sprinkler radiator, water pump fixed condition and whether there is leakage of water pipes. Check the fixed condition of the sprinkler compressor and whether there is any oil leakage or air leakage in the pipeline, and eliminate the oil and water and dirt in the air reservoir.

4. Check the fastening of the cylinder head, intake and exhaust manifolds, and mufflers of XCMG Chusheng Sprinkler, check and fasten the engine fixing bolts, nuts, and flywheel housing bolts.

V. Check the tightness of XCMG Chusheng Sprinkler Fan Belt and adjust it. Start the sprinkler engine and hear no abnormal noise when the engine is operating at idle, medium, and high speeds.

Xigong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. Manufacturers of direct sales sprinkler series, suction truck series, high-altitude truck series, sanitation garbage truck series, wrecker truck series special vehicles

This kind of End Cover Pressing Machine can meet the requirement of different end cover and armature dimension. It makes the whole pressing process far more iconvinient than by manual. This machine can also be connected to Armature Production Line to meet the mass production requirement.


It can greatly reduce the larbor forces. Firstly, operator needs to load the end cover and the armature core to the required tooling position. Then press the start button. Machine will do the pressing process. The process can be shown as below picture. Two seperate parts will be combined into one part.

end cover pressing machine


We have two types of end cover inserting machine, the automatic type and the semi-auto type. The automatic Shaft Pressing Machine is equipped with touch screen, all the parameter can be set in the touch screen. It is accurate. This automatic end cover inserting machine can be connected with a mechanical conveyor to acheive the mass production. The semi-auto type one is far more simple than the automatic one, compared with the operation step. And the price is also more favorable.

End Cover Pressing Machine

End Cover Pressing Machine,End Cover Placing Machine,End Cover Assembly Machine,End Plate Pressing Machine

Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com