ISO certificate Focus on rubber machinery since 1986 rubber calender with good thickness precision PLC control Max thickness 10mm long life time good roller in use  Performance introduction of conveyor belt equipment: ISO certificate Focus on rubber machinery since 1986 rubber calender with good thickness precision PLC control Max thickness 10mm long life time good roller in use  Performance introduction of conveyor belt equipment: Double Head Pipe Chamfering Machine Double Head Pipe Chamfering Machine,Chamfering Machine,Double Chamfering Machine,Double Head Chamfering Machine Zhangjiagang heshun machinery manufacturer co.,ltd. , https://www.hsformer.com
Â
Max calendering width 1900mm
Picture of conveyor belt equipments:
The final product:
We can offer high quality conveyor belts to clients, the extensive product range include: EP conveyor belt, Multi-plied textile belt and all kinds of V-belt. There are all kinds different products than can be applied in coal mining, steel works, harbor, power plants, cement, chemical and food industry.
Â
ModelÂ
XLB-1100*5700
XLB-1400*5700
XLB-1400*10000
XLB-1600*8500
XLB-1600*10000
XLB-2000*10000
Plate size
1100*5700
1400*5700
1400*10000
1600*8500
1600*10000
2000*10000
Total pressure
17.55MN
25.00MN
49.00MN
47.60MN
56.00MN
70.00MN
Plate pressure
2.8Â Mpa
3.13Â Mpa
3.5Â Mpa
3.5Â Mpa
3.5Â Mpa
3.5Â Mpa
Diameter of piston
500Â mm
360Â mm
450Â mm
500Â mm
450Â mm
600Â mm
Piston number
5
10
20
14
18
16
Piston stroke
520Â mm
400Â mm
300Â mm
300Â mm
400Â mm
300Â mm
Working layer
2
2
1
1
2
1
Clamping force
0.50
0.72
0.90
0.6
1.20
1.20
Drawing force
0.40
0.60
0.80
0.5
1.10
1.00
Steam pressure
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
Cooling pressure
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
Operation system
PLC
PLC
PLC
PLC
PLC
PLC
ApplicationÂ
nylon rope belt conveyor, PVG/fabric such as core parallel tape.
Â
Max calendering width 1900mm
Picture of conveyor belt equipments:
The final product:
We can offer high quality conveyor belts to clients, the extensive product range include: EP conveyor belt, Multi-plied textile belt and all kinds of V-belt. There are all kinds different products than can be applied in coal mining, steel works, harbor, power plants, cement, chemical and food industry.
Â
ModelÂ
XLB-1100*5700
XLB-1400*5700
XLB-1400*10000
XLB-1600*8500
XLB-1600*10000
XLB-2000*10000
Plate size
1100*5700
1400*5700
1400*10000
1600*8500
1600*10000
2000*10000
Total pressure
17.55MN
25.00MN
49.00MN
47.60MN
56.00MN
70.00MN
Plate pressure
2.8Â Mpa
3.13Â Mpa
3.5Â Mpa
3.5Â Mpa
3.5Â Mpa
3.5Â Mpa
Diameter of piston
500Â mm
360Â mm
450Â mm
500Â mm
450Â mm
600Â mm
Piston number
5
10
20
14
18
16
Piston stroke
520Â mm
400Â mm
300Â mm
300Â mm
400Â mm
300Â mm
Working layer
2
2
1
1
2
1
Clamping force
0.50
0.72
0.90
0.6
1.20
1.20
Drawing force
0.40
0.60
0.80
0.5
1.10
1.00
Steam pressure
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
0.63Â Mpa
Cooling pressure
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
0.3Â Mpa
Operation system
PLC
PLC
PLC
PLC
PLC
PLC
ApplicationÂ
nylon rope belt conveyor, PVG/fabric such as core parallel tape.
Fine Quality Conveyor Belt Equipments>
Model NO.: all various
Diameter of Piston: 300-600 Mm
Drawing Force: 0.4-1.0
Total Pressure: 17.55-25 Mn
Piston Stroke: 300-500 Mm
Operation System: PLC
Plate Pressure: 2.8-3.5 Mn
Clamping Force: 0.5-1.2
Application: Nylon Rope Belt Conveyor .Pvg/Fabr
Color: Green, Blue, etc
Trademark: eenor
Transport Package: According to The Customer′s Requirements
Specification: ISO9001: 2008/BV
Origin: Qingdao Shandong China
HS Code: 84778000
Model NO.: all various
Diameter of Piston: 300-600 Mm
Drawing Force: 0.4-1.0
Total Pressure: 17.55-25 Mn
Piston Stroke: 300-500 Mm
Operation System: PLC
Plate Pressure: 2.8-3.5 Mn
Clamping Force: 0.5-1.2
Application: Nylon Rope Belt Conveyor .Pvg/Fabr
Color: Green, Blue, etc
Trademark: eenor
Transport Package: According to The Customer′s Requirements
Specification: ISO9001: 2008/BV
Origin: Qingdao Shandong China
HS Code: 84778000
Fine Quality Conveyor Belt Equipments1). It is controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; the touch screen will timely show the temperature of the heating platen at each heating zone.
2)Â .The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; the hydraulic cylinder is well sealed by YX shape sealing ring.
3).The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; there are anti-superpose iron cushion device at the two sides of platen.
4)Â .There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.
5)Â .Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.
6).The in-phase balance device of the machine: there is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.
7).The guiding device for mould closing: it is designed on the two sides of the lower mat platform, there are guiding seats for the frame board and platform, the guiding seats is produced with incline and the incline distance can be adjustable by the prop up screw.
8)Â .Mould opening booster: during the mould opening, the four oil cylinder below the platform will start working and forcibly pull down the platform, which can prevent the mould from sticking.
Â
1). It is controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; the touch screen will timely show the temperature of the heating platen at each heating zone.
2)Â .The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; the hydraulic cylinder is well sealed by YX shape sealing ring.
3).The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; there are anti-superpose iron cushion device at the two sides of platen.
4)Â .There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.
5)Â .Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.
6).The in-phase balance device of the machine: there is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.
7).The guiding device for mould closing: it is designed on the two sides of the lower mat platform, there are guiding seats for the frame board and platform, the guiding seats is produced with incline and the incline distance can be adjustable by the prop up screw.
8)Â .Mould opening booster: during the mould opening, the four oil cylinder below the platform will start working and forcibly pull down the platform, which can prevent the mould from sticking.
Â
Prev Article
The Latest Version Manual Push Corn Seeder