After the drafting of the new regulations is completed, the tires can no longer be sold on the Internet!

After the drafting of the new regulations is completed, the tires can no longer be sold on the Internet!


On July 6, the Ministry of Commerce issued a notice stating that the China Rubber Industry Association's application for revision of the "Tire E-Commerce Trading Service Operational Specification" in 2017 has completed the drafting work.

In order to ensure the scientificity, rigor and applicability of the standards, China Rubber Association publicly solicits opinions from relevant industry associations, units and enterprises.

汽车电商

Tire World Network found that the revised "Tire E-Commerce Trading Service Operational Norms" has improved the relevant provisions for the handling of transaction disputes.

The normative content shows that tire e-commerce operators should provide the necessary e-commerce dispute handling mechanisms and appeal channels.

When the legal rights of the relevant parties of the transaction are infringed, the tire e-commerce should assist the infringed party to conduct information forensics, coordinate with the relevant parties of the transaction, or request consumer organizations, industry associations, and other legally established mediation organizations to mediate. .

If negotiation or mediation cannot solve the problem, the e-commerce should submit the incident to the arbitration institution for arbitration or bring a lawsuit to the people's court in accordance with relevant laws and regulations, so as to effectively ensure that the interests of the participating parties are not infringed.

According to the tire world network, since the emergence of tire e-commerce, after-sales service has been the most worrying part of consumers.

The quality of online shopping products is uneven, the cost of rights protection is high, and businesses are not able to claim claims.

Chen Yinjiang, deputy secretary general of the China Consumer Rights Protection Law Research Association, said that the domestic laws and regulations on e-commerce are not perfect, and the supervision of relevant departments is not in place.

Regarding the revision of the business norms, some insiders believe that this move not only broadens the channels of consumer rights protection, but also forms certain constraints on tire e-commerce.




Pulse Solenoid Valve
The pulse signal is input into the coil of the solenoid valve through the wire, and the pulse valve is controlled by the output signal of the pulse injection control instrument. The pressure change of the two gas chambers of the front and back of the valve can make the deformation of the rubber diaphragm open and close the pulse valve. The diameter of the rubber diaphragm determines the size of the rubber diaphragm and the speed of opening and closing. The larger the diameter of the diaphragm, the larger the stroke and the better the injection performance.
Definition:
The pulse solenoid valve is also called the diaphragm valve. It is the "switch" of the compressed air in the dust cleaning and blowing system of the pulse bag type Dust Collector. It is controlled by the output signal of the pulse injection control instrument, and blows the dust in the filter bag (room), so that the resistance of the dust collector is kept within the set range, so as to ensure the handling capacity and the dust collecting efficiency of the dust collector.
Working principle:
The coil of the solenoid valve is input into the forward pulse signal through the wire, and the working flux generated by the coil causes the moving core to pull in and open the valve. When the forward pulse signal is stopped, the moving core is released, the moving core is returned to the initial state under the effect of spring force, and the valve is also kept in the form of self holding, and it can be kept after the forward pulse or power break, and the negative pulse signal is needed to reset. The principle of the pulse solenoid valve is to use the pulse of the electrical apparatus. The impulse is transformed into a mechanical pulsation, which makes the strong energy of the pulsating gas become momentum, and produces a huge force in a short time. The interval of the pulse is controlled by PLC to be determined according to the recovery time of the rated gas pressure, L.
Use:
Usually installed in the main oil road or the shock absorber back pressure oil road, the oil pressure drops when the transmission is automatically raised and lowered, or when the lock stop and the lock stop are started, in order to reduce the shift and lock the unlocking impact and make the vehicle run more balanced.
Its function is to control the oil pressure in the oil road.
Effect:
It is to control the size of oil pressure in the oil road. It is usually installed in the main oil road or the back pressure oil road of the shock absorber to reduce the oil pressure shock when the shift and lock are unlocked, so that the operation of the equipment is kept stable.
According to the angle of valve inlet and outlet and the form of air inlet, it can be divided into three types.
1. right angle electromagnetic pulse valve: the diaphragm valve is directly controlled by electrical signals at the right angle of the inlet and outlet of the valve body.
2. straight through electromagnetic pulse valve: diaphragm valve is directly controlled by electrical signals at 180 degrees of inlet and outlet of valve body.
3. Submerged Electromagnetic Pulse Valve: diaphragm valve which is directly submerged by the valve inlet and is directly controlled by electrical signals.

Pulse Solenoid Valve

Pulse Solenoid Valve,Submerged Electromagnetic Pulse Valve,2 Inch Pulse Solenoid Valve,Rectangular Pulse Solenoid Valve

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com