Diesel Engine Driven Welders, AC DC TIG Automatic Welding Machine, China Diesel Engine Driven Welders Juba Welding Equipments Manufacturing Co., Ltd. , http://www.zjweldingmachine.com
Equipment description: The machine is suitable for mixing and processing engineering plastics, modified plastics, masterbatch and other polymers, with uniformly dispersed, plastic coloring, filling modification and so on. This product can accurately measure the pressure change of the polymer, more standard quality control polymer blend material.
Technical parameter
Screw diameter
20,25,30optimal
Screw speed
0-80rpm frequency speed
Ratio
1:25,other ratio (10-30times)optional
Screw material
 38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Cylinder material
38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Heating area
District 4 mica barrel heaters, heater head a district, each district with copper heat sink, covered with stainless steel safety hood
Cooling device
Group 4 multi-wing ultra-quiet fan forced air
Reducer
Hardened reducer, ratio 18:1, tooth grinding, load torque, low noise
Melt pressure
0-35Mpa, precise monitoring of changes in pressure and flow fluctuations, that the pressure before and after the filter and filter differential pressure
Filter mask
(5-40) microns aperture, comply with relevant standardsÂ
Driving power
2.2Kw
Power supply
AC380V.50Hz three-phrase five line
Â
Equipment name: TY-7004 Laboratory single-screw extruder
Equipment description: The machine is suitable for mixing and processing engineering plastics, modified plastics, masterbatch and other polymers, with uniformly dispersed, plastic coloring, filling modification and so on. This product can accurately measure the pressure change of the polymer, more standard quality control polymer blend material.
Technical parameter
Screw diameter
20,25,30optimal
Screw speed
0-80rpm frequency speed
Ratio
1:25,other ratio (10-30times)optional
Screw material
 38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Cylinder material
38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Heating area
District 4 mica barrel heaters, heater head a district, each district with copper heat sink, covered with stainless steel safety hood
Cooling device
Group 4 multi-wing ultra-quiet fan forced air
Reducer
Hardened reducer, ratio 18:1, tooth grinding, load torque, low noise
Melt pressure
0-35Mpa, precise monitoring of changes in pressure and flow fluctuations, that the pressure before and after the filter and filter differential pressure
Filter mask
(5-40) microns aperture, comply with relevant standardsÂ
Driving power
2.2Kw
Power supply
AC380V.50Hz three-phrase five line
Â
Ty7004 Laboratory Single Screw Extruder
Model NO.: Ty7004
Engagement System: Intermeshing
Screw Channel Structure: Non Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Driving Power: 2.2kw
Power Supply: AC380V 50Hz
Screw Speed: 0-80rpm
Frequency Speed: Yes
Trademark: Tianyuan
Origin: Yangzhou
Model NO.: Ty7004
Engagement System: Intermeshing
Screw Channel Structure: Non Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Driving Power: 2.2kw
Power Supply: AC380V 50Hz
Screw Speed: 0-80rpm
Frequency Speed: Yes
Trademark: Tianyuan
Origin: Yangzhou
Equipment name: TY-7004 Laboratory single-screw extruder