Technical Index: Material :quality alloy steels 1.38CRMOALA Supply Capacity: The product specification Screw: 15 mm in diameter-250 mm diameter screw Screw length: 300 mm to 8000 mm screw length Machine tube diameter 40 mm to 400 mm: barrel outer diameter Length-diameter ratio: L/D: 10-46 Technical Index: Material :quality alloy steels 1.38CRMOALA Supply Capacity: The product specification Screw: 15 mm in diameter-250 mm diameter screw Screw length: 300 mm to 8000 mm screw length Machine tube diameter 40 mm to 400 mm: barrel outer diameter Length-diameter ratio: L/D: 10-46
Most car, truck, and SUV owners understand the importance of having good windshield wipers on their vehicles at all times. However, many of them may not know that the windshield wiper blades and arms are moved back and forth by the Windshield Wiper Linkage. The linkage is attached to the Wiper Motor, which is typically hidden under the hood of the vehicle and protected from the elements. The Wiper Linkage may fail because it is not always protected from the sun, snow, wind, and rain and may be susceptible to wear and tear or breaking entirely without warning.
The windshield wiper linkage is designed to last the life the vehicle, but like any other mechanical part it can break when you least expect it to occur. One of the most common causes of premature wear and tear is overuse in wet weather climates or in cold areas where the windshield wipers are frozen and may stick to the windshield. This causes the linkage to strip from the Wiper Arm , requiring them to be replaced.
There are a few warning signs that will indicate that a problem with the windshield wiper linkage is beginning to wear out that if noticed early and fixed, can reduce additional parts breakage including the wiper motor.
One-Way Scraping Wiper Linkage One-Way Scraping Wiper Linkage,Windshield Wiper Linkage,Window Wiper Linkage,Car Wiper Linkage COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm
2.SKD61
3.stainless steel
4. BimetallicÂ
Production Capacity: 1500 sets/monthÂ
Packing: Fumigation wooden caseÂ
Delivery Date: 30~40 days
Product Display
Equipment Display
Packing&Delivery
Contact Us
Â
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm
2.SKD61
3.stainless steel
4. BimetallicÂ
Production Capacity: 1500 sets/monthÂ
Packing: Fumigation wooden caseÂ
Delivery Date: 30~40 days
Product Display
Equipment Display
Packing&Delivery
Contact Us
Â
Single Injection Barrel Screw for Injection Machine
HS Code: 84779000
HS Code: 84779000
Production Description