Check Valve is usually used for stopping back flow of medium. Check Valve Check Valve,Brass Check Valve,Spring Check Valve,Water Check Valve Ningbo Jiekelong Precision Manufacturing Co., Ltd. , http://www.jklvalve.com
The maximum permissible leakage of the check valve with non-metal elastic seals is zero, and that of the check valve with meal seals is 0.1xDNmm3/s. Therefore, QC passed valves with metal seals possibly have slight leakage. Hence, in the applications where check valves must not have any leakage, non-return valves with soft seals should be used.
Nominal pressure of Brass Check Valve is 1.6MPa and medium temperature for metal seal is -20℃~150℃, and medium temperature for non-metal seal is -20℃~100℃. When the non-return valve is used for saturated steam, the pressure of the saturated steam should be≤0.6MPa.
Linear Technology Introduces High Efficiency Dual Mode Boost Charge Pump
Linear Technology Corporation introduces the LTC3203-1/B/B-1, a selectable, high efficiency 500mA step-up charge pump in a compact 3mm x 3mm DFN package. The LTC3203B features a low noise constant frequency (1MHz) operating mode and a wide input voltage range of 2.7V to 5.5V with adjustable output voltage; the LTC3203-1 and LTC3203B-1 have a user selectable fixed output of 4.5V or 5V. Voltage option to power LEDs or logic circuits. The chips also feature user-selectable conversion modes (1:1.5 and 1:2) to optimize the efficiency of the charge pump, making them ideal for high-current LED backlighting and camera light power supplies for cellular phones and PDAs, and USB-powered products. A typical 3.3V or lithium-ion battery to 5V voltage conversion. The LTC3203-1 operates in Burst Mode® at light loads to achieve a low supply current of 120uA. The LTC3203B and LTC3203B-1 patented constant frequency architectures ensure low input and output ripple for all load conditions to minimize switching noise, both of which are ideal for variable frequency operation sensitive applications. . Other features of the LTC3203-1/B/B-1 include an automatic soft-start circuit that prevents excessive inrush current during startup, load and input disconnects during shutdown, and short-circuit and thermal shutdown protection. The high switching frequency of the LTC3203-1/B/B-1 allows the use of tiny external ceramic capacitors, reducing the size and cost of the solution. The low number of external components (two floating capacitors and two bypass capacitors at VIN and VOUT) and the flat DFN package allow for a very compact solution for space-constrained applications. The LTC3203EDD-1, LTC3203BEDD and LTC3203BEDD-1 are available in a flat 10-lead DFN (3mm x 3mm x 0.75mm) package. Buy in 1,000-piece quantities starting at $2.00 each. Photo Caption: 500mA High Efficiency Step-Up Charge Pump Performance Summary: LTC3203/B/-1 • Optional dual mode operation for efficiency optimization: 1:1.5 or 1:2 • Large output current: up to 500mA • Low noise constant frequency ( 1MHz) Operation • No inductor • Wide input voltage range: 2.7V to 5.5V • LTC3203B: Adjustable output voltage and operate at constant frequency under all load conditions • LTC3203B-1: 4.5V or 5V user selectable Fixed output voltage and operation at constant frequency under all load conditions • LTC3203-1: Auto Burst Mode operation, IQ approximately 120uA and 4.5V or 5V user selectable fixed output voltage • Constant under all load conditions Frequency operation (LTC3203B/LTC3203B-1) • Soft start limits inrush current when switched on • Short circuit/thermal protection • Load and input disconnect during shutdown • Shutdown current < 1uA • Flat (3mm x 3mm x 0.75mm) DFN- 10 package