Calibrator, sizing unit, Calibrating Sleeve for Pipe Size
Calibrator: made of Brass
Internal pipe cooling system design
(Air exhausts system for cooling inside pipe from Die head) Adaptor with pressure sensor
Bush:1pc for each diameter
Pin:2pcs for each diameter
Calibration sleeve:3pcs for each diameter
Calibrator Calibrating Unit,Calibrating Sleeve,Changeable Calibrator,Laminated Sizing Sleeve KonRun Extrusion Machinery Technology (Ningbo) Co., Ltd. , https://www.konrunmachine.com
CNC Punching, Marking and Cutting Machine for Angles
- Technical specification of APM2020
- Angle size: 63×63×4 ~ 200×200×20
- Max. punching diameter φ25.5mm (20mm thickness , Q345)
- Norminal punching force 1100KN
- Quantity of punching head per side: 3
- Quantity of punching row per side: arbitrariness
- Quantity of character group: 4 groups,Norminal Marking force:1030KN
- Dimension of characters: 14×10mm(18)
- Max. length of the raw angle: 14m
- Cutting mode: double-blade cutting ,norminal cutting force 1800kN
- Quantity of CNC axes: 3
- The finished angle conveyor is rotated to one side by pneumatic power, the max. length of finished angle is 12m.
- There are four sets of transverse conveyor, infeed automatically and intermittently.
- Angle feeding Speed: 40m/min, the effiency is about 1000 holes/hour
- Type of programming: keyboard input, USB interface input, floppy disc input
Working environment:
Working temperature: 0~ 40 degree
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ±10%
Frequency: 50 Hz
CNC Punching, Marking and Cutting Machine for Angles Model Apm2020
Next Article
Pizza Dough Sheeter With High Speed
Prev Article
Digital Brinel Hardness Tester (HBS-3000)