This Automotive Trim Removal Tool is convenient for detaching parts of automobile interior, exterior parts, easily to remove dash, door components and update car speakers etc. This Automotive Tools can prevent your car from scratching and damaging. 4pcs panel removal tool was made by high quality polypropylene. It has good impact resistance and toughness to ensure that it will not break during use. Ergonomic design with lightweight, easy hand-held that effectively effort saving for various interior and exterior car trimming in the shortest time.
[Installation Tools]
This automotive installation tools are daily used great for professional wrapper and novice to install auto solar window tint, paint protection films,vehicle wraps,car decals.
Effectively scrape off the soap water and air bubbles. This remove&installation tools are suitable for all edges and corners, dry and wet surfaces. A complete installation tool kit with long handle and small squeegees provide you a smooth and wonderful wrapping experience.
This OBD Inspection Oil Service Reset Tool is small and easy to carry.Easy to use, no batteries needed.Reset Inspection and Oil Service.
Instructions:
Plug the device into the 20 pin diagnostic socket of your car;
Turn the ignition on, but do not start the engine;
Press the button for the operation you want to perform;
Remove Installation Reset Tools Remove Installation Reset Tools,Clean Up Tool,Removal Tool,Uninstaller Tool Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com
This kind of submersible pump is suitable for farm irrigation, sprinkling, fountain, Rainwater Recycling System, mining drainage, rig cooling system, emergency rescue and disaster relief, urban water supply, enterprises and government institutions water lifting projects. This product is low noise, high efficiency and energy saving
Technical parameter of 12" Deep Well Submersible Turbine Pump
Max. outer diameter:281mm; Â outlet diameter: DN150
Outlet connection parameter: 8 threaded studs M16×65, bolts center distance:210mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter: 242mm, inter diameter: 150mm, thickness: 20mm) consistent to the outlet.
Medium range of 12" Deep Well Submersible Turbine Pump
1. Clean water, chilled water / cooling water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.
Motor Parameter of 12" Deep Well Submersible Turbine Pump
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power source of 12" Deep Well Submersible Turbine Pump
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of 12" Deep Well Submersible Turbine Pump
Impeller: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump bowl: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13,3Cr13, (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of 10" Deep Well Submersible Turbine Pump
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ42mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.
Supplys scope
Submersible pump unit (including the body and motor), built-in check valve, 1 flange matching with outlet, 8 threaded studs 16×65, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.
Friendly reminder:Â
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.
Â
Application of 12" Deep Well Submersible Turbine Pump
This kind of submersible pump is suitable for farm irrigation, sprinkling, fountain, Rainwater Recycling System, mining drainage, rig cooling system, emergency rescue and disaster relief, urban water supply, enterprises and government institutions water lifting projects. This product is low noise, high efficiency and energy saving
Technical parameter of 12" Deep Well Submersible Turbine Pump
Max. outer diameter:281mm; Â outlet diameter: DN150
Outlet connection parameter: 8 threaded studs M16×65, bolts center distance:210mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter: 242mm, inter diameter: 150mm, thickness: 20mm) consistent to the outlet.
Medium range of 12" Deep Well Submersible Turbine Pump
1. Clean water, chilled water / cooling water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.
Motor Parameter of 12" Deep Well Submersible Turbine Pump
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power source of 12" Deep Well Submersible Turbine Pump
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of 12" Deep Well Submersible Turbine Pump
Impeller: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump bowl: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13,3Cr13, (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of 10" Deep Well Submersible Turbine Pump
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ42mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.
Supplys scope
Submersible pump unit (including the body and motor), built-in check valve, 1 flange matching with outlet, 8 threaded studs 16×65, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.
Friendly reminder:Â
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.
Â
[Trim Removal Tool]
[OBD Inspection Oil Service Reset Tool for BWM]
Use this tool to RESET the 'INSPECTION' & 'OIL SERVICE' reminders on your BMW (1982-2001)
The LED of the chosen operation will turn on;
Keep the button pressed;
Reset is done when the LED turns off automatically;
Release button.
12" Deep Well/Borehole Submersible Electric Water Pump
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Immersion Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Transport Package: Export Wooden Case/Carton
Origin: China
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Immersion Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Transport Package: Export Wooden Case/Carton
Origin: China
Application of 12" Deep Well Submersible Turbine PumpPrev Article
Color-Zinc Plate Rivet Nut with Four Holes Head